RJ45 Network Combiner Kit
#37049
C2G
RJ45 Network Combiner Kit is rated
out of
5 by
1.
Bazaarvoice SAP Hybris Integration Version 2.8.1
$24.99 $38.99 MSRP USD
The RJ45 Network Combiner allows two computers to share a single network cable drop saving time and money. Installation takes seconds, simply connect a RJ45 Network Combiner to both ends of the of the cable run, and then complete the installation with four Ethernet cables, two cables from the network devices to the first RJ45 Network Combiner and two cables from the second RJ45 Network Combiner to two Ethernet ports on a network switch. The innovative design of this product allows the network device connected to port one to use the standard four conductors for Ethernet communication, while the network device connected to port two uses the four conductors that are typically unused. By providing two ports at both ends of the cable run, the RJ45 combiner allows two network devices to connect to two unique Ethernet ports which is required for Ethernet communication.
Please Note: Use of this product requires two available Ethernet ports on a network switch. The pair of RJ-45 Combiner kit must be used together for each installation, one on each end of the cable run, for proper operation.
Please Note: Use of this product requires two available Ethernet ports on a network switch. The pair of RJ-45 Combiner kit must be used together for each installation, one on each end of the cable run, for proper operation.
Connector 1:
(2) RJ-45 Female
Connector 2:
(1) RJ-45 Male
Quantity
930 In Stock
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.
- Send
- Save as PDF
Features
- Allows two computers to share a single cable
- Requires two available ports on a network switch
- Supports 10/100Base-T network communication
WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
Specifications
General Info
| Product Line | C2G | ||
| Color | White | ||
| UPC Number | 757120370499 | ||
| Country Of Origin | China | ||
| Application Sector | Commercial, Industrial | ||
| Warranty Type | Lifetime | ||
| Type | Adapter, Kit |
Dimensions
| Product Width US | 2.16 in | ||
| Product Height US | 1.02 in | ||
| Product Length US | 2.08 in |
Technical Information
Resources
Cutsheet
Reviews
Rated 5 out of
5
by
Don from
Bought some more
We needed additional Network items in an office and did not want to run additional cables. Works great.
Date published: 2012-11-20
Bazaarvoice SAP Hybris Integration Version 2.8.1
Questions & Answers
Just wondering: Exactly what does it mean to have "one on each end of the cable" chain? Is this an into and out of connection, like a daisy chain, e.g. the router to the computer, the computer to the printer?
The Jack splitter kit comes with 2 boxes it is used where one box goes at the ethernet wall jack to turn one jack into 2 jacks. in the switch closet, you have to plug the other box into the corresponding patch panel port to allow you to plug in 2 different patch cables to your switch. Standard ethernet cable has 8 wires inside it, Gigabit speed needs all 8 wires, but 10/100 data only uses 4 wires using wire 1, 2, 3 and 5. Wires 4,6,7, and 8 are unused. These boxes remap 4,6,7 and 8 to the other connector as that connectors wires 1, 2, 3 and 5 so you need a box on each end of the connection to allow the switch to talk to each Ethernet port on the other end using wires 1, 2, 3 and 5.
Please note your ethernet connection may get some cross-talk between wire 4 and 5 and thus may slow the connection down a bit.
Date published: 2020-02-17
Will this product pass through POE (Power Over Ethernet)?
This product is not meant to work with POE products.
Date published: 2017-10-05
I seek a product like this for a 10/1000 (gigabit) network. Does this work with a gigabit network? if not, do you have such an offering?
Product 37049 is only rated for 10/100. Unfortunately it is not capable of gigabit.
Date published: 2017-10-05
Can both computers connected via this product be used at the same time?
Yes. But it must be used in pairs. One will go at the router/switch side and the other will go on the side with the 2 computers. You are first combining 2 signal coming from the router, sending those 2 signals over a single Cat5 cable and then splitting them back out to 2 computers.
Date published: 2017-10-05
Bazaarvoice SAP Hybris Integration Version 2.8.1