Explore our 2-Post Rack and see how C2G has all the parts you need to build it with ease. This is just one possible rack configuration of nearly limitless options! If you have questions, we're here to help with a group of thoroughly trained, world-class support representatives with distinguished technical knowledge and product expertise. We are committed to providing you with the effortless experience that only C2G products and service can deliver.
Designed for mounting standard 19-inch wide equipment for networking, audio/video, communications, and automation with EIA-310 hole patterns, while also distributing cables. The 45U rack units (1.75-inches each) enable dense population of hardware without taking up much of your valuable floor space. Each rack is built to last with durable 6061-T6 structural-grade aluminum, capable of supporting a static load of 750 lbs.
Explore Products Shown Above:
You have your rack, now you need to start filling it up. We have everything you need, from shelves to patch panels & more!
Explore Products Shown Above:
The patch panel is the interface by which your network equipment will connect to the rest of your building. Run a Cat6 patch cable from your switch or server to this patch panel, then punch down a solid copper Cat6 cable to the reverse side. The Cat6 cable will then run to a terminal or other network equipment within your building.
The quickest and easiest way to move multiple strands of fiber from one point in your network to another is through MTP/MPO cables. An MTP/MPO cable is 12 fibers or more houses under a single jacket with a single connector at each end. The modules are pre-terminated with 24 LC connections to an MTP breakout harness and then tested to ensure functionality as a pair. Not only does this reduce your installation time, but it also ensures optimum quality, performance and consistency.
Made from rugged, heavy duty steel, this rack mount panel securely houses up to three pre-terminated MTP/MPO modules–providing a single location for the fiber and MTP/MPO cables to run and effectively manage any fiber on the rack.
Powering equipment mounted in a rack is crucial to operation and protecting this critical equipment is essential. The 8-outlet, rack mounted power strip provides a max surge current of 36,000 Amps, a nominal discharge current of 3kA, and a Joule rating of 2340 Joules—ensuring the peace of mind that your equipment is safe.
Every piece of datacom, A/V, or network equipment may not be rack mountable, but it is still essential to business operations. The vented shelf can be installed to keep loose equipment organized or to support heavier rack mounted equipment.
Everyone knows how easy it is for a rack to look like a mess. With C2G though, we make it easy to keep it neat, organized, and efficient!
Explore Products Shown Above:
Mounted within the EIA-310 hole pattern of the 2-post rack, this cable management panel easily maneuvers the cables from your patch panel or other equipment into the appropriate channel, either to the vertical cable management or through the egress holes to the rear of the rack to connect to other equipment.
Working in harmony with the 2-post rack and horizontal cable management, this vertical cable management unit collects the cables that are displaced from the horizontal managers and routes them either up or down to a switch, patch panel or other networking/telco equipment.
C2G has thousands of connectivity options to complete your rack. Beyond our extensive transceiver offering, we offer cabling solutions in nearly every length or color you could ever possibly need.
Explore Products Shown Above:
C2G offers transceiver modules designed for use with Cisco, Juniper, HP, and other network equipment manufacturers. These transceivers are equivalent to the OEM part number and are built to meet or exceed the specifications of the OEM. The specific configuration data is loaded on to the EEPROM of the transceivers to initialize and perform identically to the OEM, and to comply with Multi-Source Agreement (MSA) standards.
Pull one cable to connect to your MTP/MPO breakout modules. Specifically designed for Fast Ethernet, Fiber Channel, ATM, and Gigabit Ethernet applications, each MTP/MPO fiber assembly consists of 12 fibers under one jacket. The ease of install is increased by the push-pull release mechanism which allows the connector to easily engage and disengage, while the design of the latch prevents the plug from snagging while being run.
Fiber cables are the preferred method to transfer vast amounts of data over extreme distances while taking up very little space—which is precious to airflow within a data center. There are thousands of standard fiber options within our inventory, but if fiber loss budget and other variables do not allow for a standard solution when planning a data center, C2G has the capability to create custom fiber to fit any networking need.
Utilized with patch panels, switches, VoIP boxes, POE and work stations, Category cables are the workhorse of any network. With over 1000 variations of Category cables available and an experienced team skilled in the trade of custom cable manufacturing, C2G has the ability to meet nearly any cabling requirement.