Superbooster® USB 1.1 Over Cat5 Extender Dongle Kit (TAA Compliant)
#29341
C2G
Superbooster® USB 1.1 Over Cat5 Extender Dongle Kit (TAA Compliant) is rated
out of
5 by
23.
Bazaarvoice SAP Hybris Integration Version 2.8.1
$183.99 $203.99 MSRP USD
Conquer USB length limitations, and put your USB devices where you want them with our USB superbooster. This pocket-sized device extends the distance of a USB device to a host computer up to 150 feet so you can place your USB camera, printer, web cam, keyboard/mouse extension, or any other USB device exactly where you want it! This booster is powerful yet simple, with no drivers to install or special software required so it's compatible with any computer that supports USB.
This plug-and-play device consists of a base unit and a remote unit connected together by a standard Cat5, Cat5E, or Cat6 network cable (not included). Simply connect your cables to your device; then connect to your computer and USB peripheral and you're up and running. Bus-powered, it requires no external power source. Instead, the superbooster has internal DC power conditioning circuits to maintain the proper voltage to the remote device so no external power is required for either the base or remote units. Compliant with USB Specification 1.1.
Please Note: The power demands of devices such as external drives and USB hubs may require the use of external power for proper operation. Please consult with your device manual or manufacturer for details. During installation, do not connect the transmitter to the PC until all other connections in the system have been made. The other connections in this system would include the Cat5e/6 cable between the transmitter and receiver, a USB hub placed at the receiver or any other USB device that would be connected to the receiver. Connecting the transmitter to the computer without first making other connections may result in damage to the Superbooster.
Note: If the USB signal is being extended to support an interactive whiteboard, then we recommend using our product
This plug-and-play device consists of a base unit and a remote unit connected together by a standard Cat5, Cat5E, or Cat6 network cable (not included). Simply connect your cables to your device; then connect to your computer and USB peripheral and you're up and running. Bus-powered, it requires no external power source. Instead, the superbooster has internal DC power conditioning circuits to maintain the proper voltage to the remote device so no external power is required for either the base or remote units. Compliant with USB Specification 1.1.
Please Note: The power demands of devices such as external drives and USB hubs may require the use of external power for proper operation. Please consult with your device manual or manufacturer for details. During installation, do not connect the transmitter to the PC until all other connections in the system have been made. The other connections in this system would include the Cat5e/6 cable between the transmitter and receiver, a USB hub placed at the receiver or any other USB device that would be connected to the receiver. Connecting the transmitter to the computer without first making other connections may result in damage to the Superbooster.
Note: If the USB signal is being extended to support an interactive whiteboard, then we recommend using our product
Connector 1:
(1) USB-A Male
Connector 2:
(1) USB-A Female
Quantity
2147 In Stock
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.
- Send
- Save as PDF
Features
- Extends a USB 1.1 signal up to 150ft over category cables
- Allows for flexible positioning of USB peripherals
- Small form factor reduces installation clutter
- Kit includes both the transmitter and receiver units
 
WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
Specifications
General Info
Product Line | C2G | ||
Color | Black | ||
UPC Number | 757120293415 | ||
Country Of Origin | Taiwan, Province Of China | ||
Features | Plug and Play | ||
Application Sector | Commercial, Residential | ||
Warranty Type | 5-Year | ||
Type | Active Device, Extender, Kit |
Dimensions
Product Width US | 2.14 in | ||
Product Depth US | 1.49 in | ||
Product Height US | 1.0 in | ||
Cable Length | 13 in |
Additional Information
RoHS Compliant | Yes | This product meets the material restrictions of Article 4 of the RoHS Directive (2011/65/EU), including Commission Delegated Directive 2015/863. |
Listing Agencies / 3rd Party Agencies
CE Certified | Yes | ||
FCC Compliant | Yes | ||
REACH Compliant | Yes |
Buy American Act Compliance
TAA Compliant | Yes |
Technical Information
Max Distance Support | 150 ft | ||
Data Transfer Rate | 12 Mbps |
Resources
Cutsheet
User Guides
White Papers & Tech Bulletins
Reviews
Rated 4 out of
5
by
Ric the instructor from
Superbooster works Great!
I use this product in a teaching setting to allow me to interface with the engine and bring the data into the classroom.
Everything works great, I only need 75 feet of cable so the cable is too long and is a lot to handle. Otherwise a great product.
Date published: 2012-04-23
Rated 1 out of
5
by
Matt in the Hat from
Flakey at Best
Flakey, intermittent. The pins get stuck down and have to be popped back into there slots on the RJ45 connectors. Do not buy this unless you like loosing connection to your computer.
Date published: 2012-03-22
Rated 5 out of
5
by
Allan from
Works as described- Good Service
Using to boost signals for smartboard hardware, works as described. The booster saved replacing the hardware. Good service from C2G. Will use them again.
Date published: 2015-03-31
Rated 4 out of
5
by
none from
Good product.
I have used it on computer and tv connections. It works on the newer tv sets alot better. I have mostly older tv.
Date published: 2011-10-13
Rated 5 out of
5
by
joeboo from
The USB Superbooster is a cut above
We tried another brand (slightly lowered price), but it did not perform. After searching for solutions we noticed that most products ONLY recommend this USB extender for use with their product. So we ordered it - BANG! Worked perfectly right away. Since then we have not wasted our time with any other brands. This one is flawless. Thanks!
Date published: 2012-01-03
Rated 4 out of
5
by
DWS from
Simple means to extend mouse or keyboard
We recently use this item to extend a computer mouse and/or keyboard 50 feet in a number of tough enviroments. Simple to use. Recommend use with a snagless ethernet cable. The units performed well. Plug and play. No issues.
Date published: 2010-06-07
Rated 5 out of
5
by
Tech Director from
Only one that works with IWB's!
Only one that works with Hitachi DUO (two users at a time) interactive white boards. We have numerous of these units in our school
Date published: 2009-12-03
Rated 1 out of
5
by
GT from
USB 1.1 Superbooster Extender, too slow
Used to connect a web cam mounted on the top of a wall mounted 60" LCD monitor used for video conferencing. The web cam is connected to the Conf Room computer, accross the conference room, via a CAT5 cable in wall. The video quality was poor due to the slow speed of this device, USB version 1.1. A similar USB via CAT5 extender (USB 2.0) was swapped with this one and the video quality improved dramatically.
Date published: 2011-01-05
Bazaarvoice SAP Hybris Integration Version 2.8.1
Questions & Answers
Does this extender support isochronous data transfer?
Product 29341 does not support isochronous data transfer.
Date published: 2017-10-05
Will this charge an iPhone or and iPad?
We would not recommend using this to charge an iPhone or iPad.
Date published: 2017-10-05
Does this have an external power option if needed to supplement the power supplied by the USB ports? Some other extenders have a 5v female input jack on them to provide extra power when needed.
This model of extender does not have external power for USB. The power can be substituted by connecting a Powered USB Hub to the receiver.
Date published: 2022-01-18
will this system work with 2.0/3.0 compliant USB web cameras specifically the Logitech C920.
This will only support USB 1.1 speeds. That web camera supports HD video which would require more than USB 1.1 speeds. We have a USB 2.0 booster (#53880) or you could use a USB active extension cable 40ft (#38999).
Date published: 2017-10-06
Does it provide isolation between the receiver and the transmitter?
It does not provide isolation between transmitter and receiver.
Date published: 2017-10-05
Will this work with a USB hub?
Yes this can work with a USB Hub
Date published: 2017-10-05
Will this work with an xbox kinnect?
No. You would need a USB 2.0 extension for that. It would be our part 53880.
Date published: 2017-10-05
What is the Warranty of this Item?
The warranty is 1 year.
Date published: 2017-10-05
Bazaarvoice SAP Hybris Integration Version 2.8.1