50ft (15.2m) 75 Ohm BNC Cable
#40030
C2G
75 Ohm BNC Cable is rated
out of
5 by
19.
Bazaarvoice SAP Hybris Integration Version 2.8.1
$30.99 $46.99 MSRP USD
A high quality BNC cable for video applications including CCTV, broadcast, studio, boardroom presentations, home theater, etc. Manufactured from 75 Ohm RG59/U dual shield coax cable (60% copper braid over foil) with a 22 AWG copper-covered steel center conductor. Finished with bright nickel-plated BNC connectors that have molded PVC strain relief to protect the cable from wear over time.
Connector 1:
(1) BNC Male
Connector 2:
(1) BNC Male
Quantity
366 In Stock
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.
- Send
- Save as PDF
Features
- RG59/U Dual Shield coaxial cable
- Constructed with a 75copper conductor
- Nickel-plated BNC connectors
- Molded PVC strain relief
 
WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
Specifications
General Info
Product Line | C2G | ||
Color | Black | ||
UPC Number | 757120400301 | ||
Country Of Origin | China | ||
Application Sector | Commercial, Industrial, Residential | ||
Warranty Type | Lifetime | ||
Type | Cable |
Dimensions
Product Length US | 50.0 FT | ||
Cable Length | 50 ft |
Technical Information
Jacket Material | PVC (Polyvinyl Chloride) | ||
Wire Gauge | 22 AWG | ||
Cable Type | Video | ||
Jacket Rating | Standard / Non-Rated | ||
Cable Diameter | 6 mm |
Resources
Cutsheet
Reviews
Rated 4 out of
5
by
Big Shooter from
Great Product!
Product is great has easy connections and performs perfect.
Date published: 2015-04-03
Rated 5 out of
5
by
video engineer from
Nice Construction
Typically we make our own video cables, but when budget and time allow, it is nice to have factory-made cables for your projects. This one is very durable - good strain relief at both ends. This should last years without any problems.
Date published: 2012-01-25
Rated 5 out of
5
by
Eli the buyer from
Perfect for the job
Used at trade shows to connect equipment to monitor.
Date published: 2011-08-31
Rated 4 out of
5
by
Radio Guy from
Low loss short connection
Low loss connection between an Elecraft K3 Transceiver and their P3 Spectrascope
Date published: 2011-10-10
Rated 4 out of
5
by
Harry from
Quality product, price is right
Haven't had it long enough to rate it for performance/durability, but the construction is obviously of good quality.
Date published: 2009-05-04
Rated 4 out of
5
by
Ron from
Work well but a bit smelly
This product is used to hook up two video tower so cases can be recorded.
Date published: 2010-03-22
Rated 5 out of
5
by
Tronworx from
Good performance item.
Used in mobile video recording system.
Date published: 2012-05-18
Rated 5 out of
5
by
I have no nickame from
The Same - Time After Time
I needed some short BNC cables to wire up a rack of analog equipment. These worked perfectly and the price was great too. I'll be back for more.
Date published: 2009-05-04
Bazaarvoice SAP Hybris Integration Version 2.8.1
Questions & Answers
I have a wireless security camera in my barn. The walls are 2' solid rock and mortar and the wireless signal is not even making out of the building. What I am trying to do is to remove the antenna from the camera, extend the antenna alone outside of th...
I have a wireless security camera in my barn. The walls are 2' solid rock and mortar and the wireless signal is not even making out of the building. What I am trying to do is to remove the antenna from the camera, extend the antenna alone outside of the barn and mount it there leaving the camera itself inside the barn. Will this work for that application?
This will depend on how the antenna is connected to the camera. If it is connected via BNC then you would want to check with the manufacturer to see if this is possible.
Date published: 2017-10-06
This cable is RG59/U Dual Shield coaxial cable and constructed with a 75Ω copper conductor. This is acceptable for my requirements. However, are the molded PVC strain relief nickel-plated BNC connectors rated at 50 or 75 Ohm. You do not distinguish bet...
This cable is RG59/U Dual Shield coaxial cable and constructed with a 75Ω copper conductor. This is acceptable for my requirements. However, are the molded PVC strain relief nickel-plated BNC connectors rated at 50 or 75 Ohm. You do not distinguish between either in the prod disc. It would stand to reason the connectors are 75 Ohm; however, the photo you show is that of 50 Ohm BNC. Some clarification is necessary for me to purchase these from you.
The Connectors will Be 75Ohm connectors.
Date published: 2017-10-06
Hello Is this cable suitable for Digital SDI signal?
It will pass the SDI signal but it is not specifically designed for that application. So it is not the ideal cable for that but it will pass the signal.
Date published: 2017-10-05
What is wire's outer jacket diameter?
This is 6mm
Date published: 2019-09-27
is this cable good for exterior use? Where can I find longer sections, like 300 or more feet? Thanks
It is not an outdoor rated cable. We do not carry this cable in longer lengths than 100ft. We do custom make cables. Please see the link below. http://www.cablestogo.com/custom-and-oem/overview
Date published: 2017-10-05
Do you have any Marine approved BNC cables for video cameras for boats that are ABS certified.
All Specialty Cables Can be sent through our Custom Quote Team. Enter Custom in the search at the top of the page and proceed with the page.
Date published: 2017-10-06
Bazaarvoice SAP Hybris Integration Version 2.8.1